Centro de documentación
Descarga fichas y resúmenes técnicos, guías de instalación y mucho más.
IQ Gateway software version 7.6.336 supports IQ7 Series and M Series Microinverters along with IQ Battery 3T/10T and AC Battery for Germany, Belgium, Austria, France, Netherlands, and Switzerland.
-
Gateways supported: IQ Gateway Metered
-
Countries: Austria, Belgium, France, Germany, Netherlands, Switzerland
-
Microinverters supported: IQ7 Series, M Series, third-party string inverters
-
Batteries supported: IQ Battery 3T/10T, AC Battery
-
Supported system configurations:
-
Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
-
Grid-tied solar and storage systems with compatible third-party string inverters, IQ Gateway Metered, and IQ Battery 3T/10T
-
Grid-tied solar and storage systems with M Series Microinverters, IQ Gateway Metered, and IQ Battery 3T/10T
-
Grid-tied solar and storage systems with IQ7 Series Microinverters, IQ Gateway Metered, and AC Battery
-
Grid-tied solar and storage systems with M Series Microinverters, IQ Gateway Metered, and AC Battery
#
Feature
Description
1
Bug fixes
-
Fixes the issue of multiple USB unplugged events observed in the Enphase Installer Portal.
-
Fixes the issue of microinverters, batteries, and other devices not reporting status by improving the Zigbee communication.
-
Fixes the issue of the Battery Management Unit (BMU) shutting down whenever the IQ battery is idle.
-
Fixes the issue of undesirable power consumption (tare loss) by the battery when in idle state.
-
Fixes the issue of IQ Battery maximum state-of-charge (SoC) being limited to 97% instead of 100%.
-
Fixes the issue of Phase Imbalance Management (PIM) getting enabled for single-phase systems.
This release is being deployed via remote software upgrades for all systems.
-
IQ Gateway software version 07.00.93 supports IQ8-Series Microinverters with integrated MC4 connectors in North America and gives enhanced security to handle grid profiles.
-
Platforms Supported : IQ Gateway, Envoy S Metered, IQ Combiner 3/3C/3-ES/3C-ES/4/4C
-
Geographies : USA, Mexico, Canada and Brazil
-
Microinverters Supported : M-Series, S-Series, IQ6, IQ7, IQ8
-
Supported System Configurations :
-
M-Series/S-Series microinverters + Envoy S Metered - Grid Tied System
-
IQ6/7/8-Series Microinverters + IQ Gateway/ IQ Combiner 3/3C/3-ES/3C-ES/4/4C - Grid Tied System
-
Release notes:
| # | Feature | Description |
|---|---|---|
| 1 | Enhanced security to handle grid profile | Brings security enhancements to handle the grid profile in the system. |
| 2 | Support for IQ8PV Microinverters with integrated MC4 connector | The previous models of IQ8-Series Microinverter had a provision for adapter cable. The new model has an integrated MC4 connector and no adapter cable. The SKUs for the previous models had a character ‘2' in the name which is replaced by letter 'M’. e.g.; Previous model SKU ‘IQ8PLUS-72-2-US’ is named as ‘IQ8PLUS-72-M-US' for the new IQ model. The released version of software supports IQ8-Series Microinverters with integrated MC4 connectors along with the older models as well. |
| 3 | Bug fixes for the Enable/Disable Power Production feature in the Enphase Installer Portal (formerly Enlighten Manager) | Fixes an issue in versions prior to 7.0.93 where after disabling power production via the Enphase Installer Portal, the button to re-enable power production was never available. The button now changes to blue with text “Enable Power Production” after the IQ Gateway has successfully disabled power production on the microinverters and has reported this to the Enphase cloud. |
This release is being deployed in factories to the IQ Gateway and Envoy S based devices stated above.
IQ Gateway software version 7.0.88 is a major release of IQ Gateway embedded software with improved communication performance between the devices in the system.
-
Platforms Supported: IQ Gateway, Envoy-S Metered, Envoy-S Standard, IQ Combiner 3/3C/3-ES/3C-ES/4/4C
-
Geographies: Worldwide
-
Microinverters Supported: M-Series, S-Series, IQ6, IQ7, IQ8
-
Supported System Configurations :
-
M-Series/ S-Series/ IQ6/7/8 Microinverter, IQ Gateway/ Envoy-S Metered/ Envoy-S Standard/ IQ Combiner 3/3C/3-ES/3C-ES/4/4C, IQ System Controller 1/2
-
Note: Load control, solar circuit i.e., PV shedding, and generator support features are available for supported system configurations mentioned above.
| # | Feature | Description |
|---|---|---|
| 1 | Local Communication Performance Improvement | Brings communication performance improvement between the devices in the system. |
This release is being deployed through the Enphase Installer App for new systems as well as via remote software upgrades for existing systems.
IQ Gateway software version 7.0.86 introduces updated security measures, new product support and is the next major worldwide release version of IQ Gateway embedded software. To read more about how to access Envoy locally with enhanced security, visit our webpage here:
-
Platforms Supported: IQ Envoy, Envoy S Metered, Envoy S Standard
-
Geographies: Worldwide
-
Microinverters Supported : M-Series, S-Series, IQ6, IQ7, IQ8
| # | Feature | Description |
|---|---|---|
| 1 | Support for IQ8 Series Microinverters | IQ Gateway SW 7.0 supports IQ8 microinverters in North America in grid-tied applications |
| 2 | Enhanced Security | The security infrastructure for accessing IQ Gateways using local APIs has been upgraded. The system now uses a token-based authentication mechanism to allow access for local data instead of a username/password combination. Read more about the local data access security here |
| 3 | Enphase Cellmodem Support | The new Enphase Cellmodems CELLMODEM-M1-06-SP-05 and CELLMODEM-M1-06-AT-05 are now supported by IQ Gateway for plug-and-play install |
| 4 | IQ Battery and System Controller Support | IQ Gateway SW 7.0 makes your system easy-to-upgrade to incorporate IQ Battery storage and System Controller in future |
| 5 | Reporting Enhancements for Metering Data | IQ Gateway can now increase the reporting frequency to Enphase Cloud on-demand for live debugging of the system in case of system issues. This can reduce the time to fix a potential system issue. The PV system will now support live status and live vitals with this update |
| 6 | PCS Support | IQ Gateway 7.0 supports Power Control System (PCS) to avoid main panel upgrade when oversizing M-Series/IQ6/IQ7 PV inverters in North America for installations using an IQ System Controller. You can read more about this feature here |
| 7 | Bug Fixes and Feature Enhancements | IQ Gateway SW 7.0 fixes a few bugs and improves the stability of system features in the existing IQ Gateway SW release |
El IQ Combiner 3P EU cumple la norma IEC61439-3. En la hoja de datos se indican las normas específicas que cumplen los diferentes componentes del IQ Combiner.
Mueve los transformadores de corriente de producción a los cables entre el RCD y el interruptor. Este paso garantiza la medición del valor acumulado de corriente de los circuitos fotovoltaicos de ambos IQ Relay.
Sí, el IQ Combiner 3P EU viene instalado de fábrica con un kit de comunicaciones 1. La unidad USB puede parecer un amplificador de señal, pero en realidad es el kit de comunicaciones 1 sin la carcasa exterior habitual (diseñado para ser compacto).
El IQ Combiner 3P EU viene instalado de fábrica con los IQ Relay trifásicos (Q-RELAY-3P-INT).
El IQ Combiner 3P EU viene instalado de fábrica con el IQ Gateway Metered (ENV-S-EM-230)
El IQ Combiner 3P EU está actualmente disponible en 9 países: Alemania, Austria, Suiza, Países Bajos, Francia, Bélgica, España y Polonia.
(Nota: Este producto está diseñado para los países de la UE y en el futuro podría estar disponible en otros países. Consulta los sitios web específicos de cada país para estar al día de la disponibilidad).
Un dispositivo de corriente residual (RCD) de 30 mA, 63 A, tipo A, de 4 polos para protección de falla a tierra.
Interruptores de curva B de 20 A, 4 polos.
La guía de instalación rápida del IQ Combiner contiene toda la información necesaria de todos los componentes esenciales para la instalación. Las guías de instalación específicas de cada componente están disponibles en el centro de documentación.
Sí. Sin embargo, cuando utilices un sistema de este tipo, mueve el transformador de corriente de producción a las líneas de alimentación del inversor de cadena.
: No, el IQ Combiner 3P EU está diseñado únicamente para instalaciones en espacios interiores.
- Abre la tapa lo máximo posible.
- Retira la tapa de la bisagra tirando de la puerta en la dirección de apertura de la bisagra.
- Colócala de forma segura cerca del lugar de instalación.
La tapa de plástico sirve para cerrar el espacio que deja el IQ Gateway en la cubierta delantera. Colócalo después de haber finalizado el resto de la instalación.
